USED Aria Pro II / Bich 10st Type Natural(Walnut) [12]

A very rare Japanese copy of Bich 10 Strings has just arrived!
From the 1970s to the 1980s, various domestic brands produced and sold copies of the B.C. Rich, but this particular model is a reproduction of the Bich 10-string by Aria Pro II.

The serial number indicates that it was manufactured around 1980, but there are no documents that clearly state the official model name or specification details.

It has GROVER Imperial pegs, BADASS bridge, DiMarzio pickups, cloud inlays on the fretboard, and the distinctive electrical controls.

While the original has a through-neck construction, this one has a set-neck construction, but the joint is heel-less with no bumps and so smooth that it could be mistaken for a through-neck at first glance.

This is a very rare item that has been kept in good condition both as a musical instrument and as a collectible item for Japanese vintage enthusiasts.
Please consider this opportunity!
There are some minor scratches and dents scattered throughout, but it is in very good condition with little signs of use.
The instrument has been maintained and cleaned at our repair center, and is in good playability condition.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 008024
Year of manufacture: 1980-
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 3.68kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 44.3mm
Neck thickness near 1st fret: 20.0mm
Neck thickness near 12th fret: 23.5mm
SCALE: 628mm (24.75")
RADIUS: 254mm (10")
Strings in setup: D'Addario EXL150 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, control cleaning

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number 008024

Year of manufacture 1980-.

Country of manufacture Japan

CaseNon-genuine soft case

Weight 3.68kg

No truss rod problem, rod is fine, checked up to 60 degrees to the left and right

Fret remainder no problem, enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 44.3mm

Neck thickness near 1st fret 20.0mm

Neck thickness near 12th fret 23.5mm

Scale 628mm (24.75")

RADIUS254mm (10")

Strings D'Addario EXL150 / .010-.046 set at setup

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, control cleaning