USED Fender / Player II Mustang Black [12]

Mustangs designed for the modern player.
The Player II series mustangs are now in stock, featuring a classic form with modern playability and specs.

Alder body with satin urethane finish, modern "C" shape maple neck, 9.5" radius slab rosewood fingerboard with 22 medium jumbo frets, and carefully rolled off fret edges. The fret edges are carefully rolled off.

The pickups are equipped with Player Series Alnico V Single-Coil Mustang pickups, which provide crystal-clear high-end, musical midrange, and tight low-end, and allow for a wide variety of sound makeup from superbly clear tones to crisp, crunchy tones. The pickups are equipped with the Player Series Alnico V Single-Coil Mustang pickups, which provide a tight low end.
The overall condition is good with minor scratches and dings, and the hardware is dull, but there are few signs of use.
The instrument has been maintained and cleaned at our repair center, and is in good playability condition.
There is a tear on the inside of the case where the head hits.
Item Rank: B+: Some scratches, but no problem for normal use.

Serial Number: MX24054150
Year of manufacture: 2024
Country of manufacture: Mexico
Case: Non-authentic soft case
Weight: 3.16kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.4mm
Neck thickness near 1st fret: 20.9mm
Neck thickness near 12th fret: 22.1mm
SCALE: 610mm (24")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number MX24054150

Year of manufacture 2024

Country of manufacture Mexico

CaseNon-genuine soft case

Weight3.16kg

No truss rod problem, rod is fine, checked up to 60 degrees to the left and right

Fret remainder no problem, enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.4mm

Neck thickness near 1st fret 20.9mm

Neck thickness near 12th fret 22.1mm

Scale610mm (24")

RADIUS184mm (7.25")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair