USED Paul Reed Smith (PRS) / McCarty Moon Inlay 2001 Black Cherry [12]

This model is more conscious of the vintage sound in PRS, which has a strong impression of modern specs and sound.
This model was created on the advice of Ted McCarty, who once served as president of Gibson and was involved in the development of Les Paul.

The body is thicker than the Custom 22 and 24, and the cruson pegs and wide fat neck shape give it a more traditional and orthodox sound compared to other PRS models.

The McCarty Treble/Bass pickups were developed especially for this model. This pickup is also based on the vintage sound, and is recommended for users who seek a calm tone.

Since 2000, PRS has been very active with hard and heavy band sounds, and this McCary, which is inspired by vintage guitars, is one of the most atmospheric guitars.
There are some touch-up marks on the first string side horn on the back of the body, some minor scratches and dents scattered throughout, and the hardware is dull.
The overall appearance of the instrument is slightly used, but it has been maintained and cleaned at our repair center, and is in good playability condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 157941
Year of manufacture: 2001
Country of manufacture: USA
Case: Original hard case
Weight: 3.67kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.5mm
Neck thickness near 1st fret: 22.3mm
Neck thickness near 12th fret: 24.4mm
SCALE: 635mm (25")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* This is a used item and there are scratches, dents, etc. that are difficult to see in the photos or other than those listed. Please understand this in advance.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number 157941

Year of manufacture 2001

Country of manufactureAmerica

CaseGenuine hard case

Weight 3.67kg

No truss rod problem.

Fret remainder no problem, there is enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 43.5mm

Neck thickness near 1st fret 22.3mm

Neck thickness near 12th fret: 24.4mm

SCALE 635mm (25")

RADIUS254mm (10")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment