USED ESP / FOREST BASS / BOLT ON See Through Brown [12]

FOREST, one of the representative models of ESP basses, is now in stock!
The FOREST has an artistic form that realizes a three-dimensional beauty of modeling, but also has good balance when played, and is highly appreciated by bassists in Japan and abroad.

The body and head veneer are made of flame maple, with a 3-piece maple neck and ebony fingerboard with bolt-on joints and 24 frets.

The pickups are Seymour Duncan BASSLINES (model number unknown) mounted in PJ arrangement.

The controls are simple: 2 volume/2 tone and a pickup selector with a toggle switch.
There are many scratches, dents, and paint peels scattered throughout, and there is a large ding on the neck grip.
The pegs have been reattached and there is a paint crack on the back of the head.
The bridge is equipped with a Schaller bridge, but it may have been replaced due to the shape and size of the cavity.
The neck is a little high, but this does not affect the playing due to the setup.
The strap pins have been replaced with Schaller locking pins, but the strap side parts are missing.
The truss rod cover is missing and there are some signs of use overall, but playability is good as each part has been maintained and cleaned at our repair center.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Country of manufacture: Japan
Case: Original hard case
Weight: 3.82kg
Truss Rod: No problem, rod is 60 degrees to the left and right (with high spring).
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 42.5mm
Neck thickness near 1st fret: 20.1mm
Neck thickness near 12th fret: 22.0mm
SCALE: 864mm (34")
RADIUS: 254mm (10")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* Please note that this is a used item and there may be scratches, dents, etc. that are not easily seen in the photos or scratches other than those listed. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.