USED Bacchus / Handmade Series Twenty-Four DX4 Brown Oil [12]

The discontinued Twenty-Four is now in stock in used condition.
As the series name suggests, this handmade series is carefully produced by hand at Deviser's Asuka Factory.
The Twenty-Four features 24 frets and is also known as the Twenty-Four.

The two-piece ash body, maple neck, and ebony fingerboard are 24-fret specs.
The small dinky-shaped body and cutaway cut deeply into the first string side boasts excellent playability even at high frets.

Equipped with a JBT-ALV set of original humbuckers and a preamp that combines a Bartolini XTCT with a 500Hz mid-boost MCT500.

One volume, balancer, 3BAND EQ, coil tap switch, and active/passive switch allow for a very wide range of sound creation.
There is a buckle scratch on the body back and numerous scrapes and dings scattered on the body top.
The elbow contour and the paint around the back contour is faded due to wear.
The strap pins have been replaced with Schaller locking pins, but the strap side parts are missing.
The strap pin has been replaced with a Schaller locking pin, but the strap side part is missing.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: 105873
Country of manufacture: Japan
Case: Original soft case
Weight: 4.24kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 38.0mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 23.3mm
SCALE: 864mm (34")
RADIUS: 305mm (12")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.