USED Tokai / KLC345BB MOD Black [12]

A pure Japanese replica model of the Black Beauty 3-Pickup by Tokai is now in stock!
Based on the KLC345BB, which was ordered by a certain music store, some parts have been replaced to make it easier to handle.
The truss rod cover has been replaced with the original G Les Paul Custom engraving, and the jack plate and pickguard are the same type, but the shape has been replaced with slightly different parts.
The control knob has been changed from a speed knob to a hat knob.
The Bigsby B7 tailpiece is standard, but the string shaft and front roller have been replaced with a Callaham upgrade kit to facilitate smooth string changes.

There is some paint floating around the pegs on the top of the head.
There are some minor scratches and dents scattered throughout, and the metal parts are dull.
Although there are some signs of use and modifications, each part has been maintained and cleaned at our repair center, and the playability is good.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 1840554
Country of manufacture: Japan
Case: Original hard case
Accessories: Original parts (truss rod cover, jack plate, pick guard, knobs, bridge parts)
Weight: 4.50kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height
String height on bass string: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 22.6mm
Neck thickness near 12th fret: 24.8mm
SCALE: 625mm (24.6")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

specs, etc.)

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
1840554

Country of manufacture
Japan

Case
Genuine hard case

Accessories
Original parts (truss rod cover, jack plate, pick guard, knobs, bridge parts)

Weight
4.50kg

Truss Rod
No problem, rod has been checked up to 60 degrees to the left and right

Leftover frets
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.0mm

Neck thickness near 1st fret
22.6mm

Neck thickness near 12th fret
24.8mm

Scale
625mm (24.6")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment