USED Knaggs Giutars / Severn Tier2 HSS Burgundy [12]

This handmade guitar brand was established by Joe Knaggs, who was involved in the founding of a certain high-end guitar brand and was also responsible for custom store grade guitars, under his own name.
While based on the traditional ST model, this model has an original and artistic design, as well as a set neck, originally designed bridge, and other acoustical and functional features that have been well thought out.
Alder back/quilted maple top body and curly rock maple/cocobolo fingerboard are firmly jointed with a unique set neck system.
GOTOH locking pegs and the original bridge with hinge construction are combined to achieve smooth arming and stable tuning.
Pickups are Seymour Duncan APS-1 x 2 and TB-4, but they are customized for Naggs guitars and can be coil-tapped with rear tone push/pull.
The neck shape profiles the neck of Joe Knaggs' 1961 Strat, giving it a modern design but with a vintage-like playing feel.
The neck shape is a modern design, but with the vintage feel of a vintage guitar.

There is a slight whitish tarnish on the top of the body, and there are many scratches and dents scattered throughout the body.
The guitar has been maintained and cleaned at our repair center, and is in good playability condition.
The standard Jim Dunlop locking pins have been replaced with normal non-locking strap pins.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 428
Year of manufacture: 2014
Country of manufacture: USA
Case: Original hard case
Accessories: Arm
Weight: 3.56kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.9mm
Neck thickness near 1st fret: 21.4mm
Neck thickness near 12th fret: 23.6mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, nut adjustment

specs

Item Rank
B+: Some scratches, but no problem in normal use

12 months old

Serial No.
428

Year of manufacture
2014

Country of Manufacture
United States of America

Case
Genuine hard case

Accessories
Arm

Weight
3.56kg

Truss Rod
No problem, rod checked up to 60 degrees left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.9mm

Neck thickness near 1st fret
21.4mm

Neck thickness near 12th fret
23.6mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, nut adjustment