USED Paul Reed Smith (PRS) / SE McCarty 594 Vintage Sunburst [12]

The McCarty 594 is the result of PRS's insatiable inquisitiveness.
Inspired by the sound of vintage guitars, the McCarty 594 is an affordable SE version of the quintessential PRS McCarty 594, which was developed by rethinking everything from scale and neck shape to hardware, pickups, and electrical systems.
The body is thicker than the Custom, with a superb flame maple top, and the 24.594" scale neck, from which the model takes its name, is a slightly thicker Pattern Vintage shape.
The 58/15 LT "S" pickups on this model were meticulously designed to achieve the distinctive vintage sound with transparency and warmth, and are designed to follow the style of the guitar that inspired it, with a two-piece bridge and vintage-style tuners. The controls are 2 volumes and 2 tuners.
Two volume and two push/pull tone controls allow smooth switching between humbucking and single coil sounds.

The bridge and tailpiece are dull, but overall the guitar is in good condition with only minor scuffs and scratches.
The neck is a little wavy and the truss rod has little room to tighten, but all parts have been maintained and cleaned at our repair center, so playability is good.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: CITF010569
Year of manufacture: 2023
Country of manufacture: Indonesia
Case: Original soft case
Weight: 3.31kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.1mm
Neck thickness near 1st fret: 21.9mm
Neck thickness near 12th fret: 24.6mm
SCALE: 624.68mm (24.594")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and Maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, and rubbing

specs

Item Rank
B+: Some scratches, but no problem for normal use.

12 months old

Serial No.
CITF010569

Year of manufacture
2023

Country of manufacture
Indonesia

Case
Genuine soft case

Weight
3.31kg

Truss Rod
No problem (a little left, wavy)

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.1mm

Neck thickness near 1st fret
21.9mm

Neck thickness near 12th fret
24.6mm

Scale
624.68mm (24.594")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing