USED Fender Custom Shop / 2020 Limited Telecaster Custom Relic Black [12]

The 2020 Limited Edition Telecaster Custom is now in stock.
This model was released in 1972, and is still very popular today due to its unique sound and presence created by the look and specifications that set it apart from previous Telecasters.
It has a Schaller peg with an "f" engraved on the gear cover, commonly known as an F-KEY, a wide-range humbucker front pickup, and a single coil rear pickup, which gives it both a sweet and fat tone and a crisp Telecaster-like tone.
The 2-volume/2-tone design with a volume/tone switch for each pickup and a 3-way toggle switch on the side of the 6-string neck instead of a lever switch are controls not found on conventional Fender guitars.
The ash body and maple neck/fingerboard have 21 frets, and the 9.5" fingerboard radius with narrow tall frets is modern spec for modern playing.

Overall, there are numerous scratches, dings, and paint peeling, and the metal parts are rusty and tarnished, but this is due to the relic process.
The appearance of use over time has been reproduced quite realistically, and we cannot judge the actual use of the product.
It has been maintained and cleaned at our repair center and is in good playability.
The original hard case is missing and a non-genuine gig case is included.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: CZ545240
Year of manufacture: 2020
Country of manufacture: USA
Case: Non-authentic gig case
Accessories: Certificate of Authenticity, Spec Sheet
Weight: 3.23kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 22.0mm
Neck thickness near 12th fret: 23.5mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

specs & measurements: 1.

Item Rank
B+: Some scratches, but no problem for normal use.

12 months old

Serial No.
CZ545240

Year of manufacture
2020

Country of manufacture
United States of America

Case
Non-Genuine Gig Case

Accessories
Certificate, Spec Sheet

Weight
3.23kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.0mm

Neck thickness near 1st fret
22.0mm

Neck thickness near 12th fret
23.5mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing