USED Fender USA Fender / 1980s Telecaster Custom Natural [20]

This is a 1980's Telecaster Custom in player's condition.
The pot date is 1980, and from the specifications, we judged it to be an early 1980's unit.
The front pickup is a humbucker pickup made by Seth Lover, the developer of Gibson's original P.A.F., and is specially designed for Fender guitars.
This is a truly custom instrument that cannot be played on any other Telecaster.
It has a clear and crisp sound that is typical of the 80's, with an attractive percussive sound that is also suitable for percussive cutting.
The body and finish have some cracks due to age, but you can still feel the style of the past.
The frets have been fretted and adjusted after our arrival, so it is in good playing condition.
It is in player's condition, so you can use it immediately for live performance and recording.
Pot Date: 1378021

The entire piece has scratches, dings, and paint chips, and shows signs of use due to its age.

Item rank: B+ (Good)

Year of manufacture: 1980's
Truss rod: There is room to spare
Fret : less than 50
Accessories : Hard case / Non-genuine
Country of Origin ： USA
Weight ： 4.04kg
Serial ： S817235

Truss Rod : No problem.
Fretboard: Still good for cutting, but the frets are low.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|41.5mm
Neck thickness(near 1st fret)|22.0mm
Neck thickness (near 12th fret)|24.0mm
SCALE|648mm (25.5")
RADIUS|184mm (7.25")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fretboard Remaining
Note that the frets are low and can still withstand cutting.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
41.5mm

Neck Thickness (near 1st fret)
22.0mm

Neck Thickness (near 12th fret)
24.0mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing