USED Fender Custom Shop Fender Custom Shop / Eric Clapton Stratocaster Midnight Blue [20]

The body is made of carefully selected alder, the neck is one-piece maple, and the neck shape is the soft "V" shape that Clapton loved so much, with a 9.5 radius fingerboard and vintage-type frets.
Three "Vintage Noiseless" single-coil pickups are mounted on the pickup system, which not only reduces noise, but also produces a very fat and responsive sound.
It also has a ""TBX tone control"" that allows you to freely control the high and low frequencies, so it can handle a wide range of sounds from sweet fronts to jangly cutting sounds.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and rubbed together, so it is in good playing condition.

There are some parts that have some scuffs and rust, but there are no noticeable scratches or dents, only minor scratches and small dings.

Item rank: B+ (Good)

Year of manufacture: 2007
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Hard case / Genuine tremolo arm, bridge cover, certificate
Country of Origin ： USA
Weight ： 3.54kg
Serial ： CZ506188

Truss Rod : No problem, confirmed up to 60 degrees on both sides of the rod.
Fret height: No problem, enough fret height.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.0mm
Neck thickness(near 1st fret)|21.4mm
Neck thickness (near 12th fret)|24.0mm
SCALE|648mm (25.5")
RADIUS|241mm (9.5")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.0mm

Neck Thickness (near 1st fret)
21.4mm

Neck Thickness (near 12th fret)
24.0mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing