USED Paul Reed Smith (PRS) / SE Custom 24 Beveld Top Quilt Limited Black Cherry [20]

This is the "SE Custom24" from the PRS SE series, a classic with outstanding cost performance.
This instrument is one of the limited model with a quilt maple top.
Quilt maple, which is not found on the regular SE model, is used for the top material.
The body, neck, and head are each trimmed with cell binding, and the matching head design adds to the high-class feel.
The appeal of this model is that it has both a crystal-clear, crisp tone in the clean mode and a modern tone with a sense of power in both the low end and high end in the drive mode.
The smooth arming of the PRS-designed tremolo and other Paul Reed Smith features and ideas are incorporated in abundance in this instrument.
It is also equipped with a coil tap, which allows for a variety of sound makeup.

* After it arrived at our store, it has been cleaned, string replaced, rod adjusted, octave adjusted, and string height adjusted, so it is in good playing condition.

The arm is missing.
It is in good condition with only minor scratches.

Item rank : B+ (Good)

Year of manufacture : 2019
Truss Rod : There is plenty of room
Fretboard : 60-70%.
Accessories ： Soft case / Genuine
Country of Origin ： KOREA
Weight ： 3.74kg
Serial ： T05988

Truss Rod: No problem, confirmed up to 60 degrees left and right
Fret height: No problem, enough fret height.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.6mm
Neck thickness(near 1st fret)|21.4mm
Neck thickness (near 12th fret)|23.0mm
SCALE|635mm (25")
RADIUS|254mm (10")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
43.6mm

Neck Thickness (near 1st fret)
21.4mm

Neck Thickness (near 12th fret)
23.0mm

Scale
635mm (25")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment