USED ASTURIAS Asturias / Solo Herringbone [20]

German spruce solid top, Indian rosewood solid back, Indian rosewood plywood sides.
As the name suggests, this model was developed for solo guitarists/fingerpickers. Despite its small body, the 648mm scale is long like that of a dreadnought, and it has a moderate tension.
The sound is well-balanced and easy to play in any position, yet each note rises smoothly and has a solid volume sound.
Herringbone binding and GOTOH open gear pegs give it a vintage-like classical look.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, mortised, and bracing glued, so it is in good playing condition.

There is a paint crack of about 3mm under the bridge, and the paint has peeled off due to the correction of the top crack, and there are marks where the bridge peeled off has been corrected.
There is some floating on the top of the body, and there are some scratches and small dents on the whole.

Item rank: B (average)

Truss rod: There is enough room.
Fret: 60-70%.
Attachment ： Soft case / Non-genuine
Country of Origin ： JAPAN
Weight ： 1.81kg
Serial ： 33142

Truss Rod : No problem, confirmed to be 60 degrees to the left and right
Fret height: No problem, enough fret height.
String height(bass string side)|2.4mm above 12th fret
String height(treble string side)|1.8mm above 12th fret
Nut width|43.0mm
Neck thickness(near 1st fret)|21.8mm
Neck thickness(near 12th fret)|-
SCALE|648mm (25.5")
RADIUS|406mm (16")
Strings used for setup|Galli Strings / .012-.053 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, bracing gluing

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.4mm above 12th fret

String height (treble string side)
1.8mm above 12th fret

Nut width
43.0mm

Neck Thickness (near 1st fret)
21.8mm

Neck Thickness (near 12th fret)
-Neck Thickness (near 12th fret)

Scale
648mm (25.5")

RADIUS
406mm (16")

Strings for setup
Galli Strings / .012-.053 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, bracing gluing