USED GRECO Greco / GOII-750DST Dark Stain [20]

The famous Greco GO series, used by top players in Japan and still vividly remembered by many.
This is Greco's most popular model, which graced the first page of the 1979 catalog as the top-of-the-line GO II model in the catalog at that time.
The Greco GO series was the top-of-the-line GO II model in the catalog at the time, and was featured on the first page of the catalog in 1979.
The unique tremolo system works as well as traditional tremolos such as Stratocaster, and allows for hard arming with less force.
This is one of the rare 3-single specs.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, and string height adjusted.
The neck was threaded and the open strings were chattering, so the string height has been adjusted slightly higher.

The bridge has some floating plating and some parts have some stains.
There are some minor scratches and dents, but considering the age of the instrument, it is in relatively good condition.

Item rank: B+ (Good)

Year of manufacture: 1979
Truss rod: Nearly fully tightened
Fretboard: 60-70% full
Accessories: Soft case/non-genuine arm, handbook from the time of sale
Country of Origin ： Japan
Weight ： 4.12kg
Serial ： D797093

Truss Rod : No problem, confirmed up to 60 degrees left and right (not much left)
Fret height is sufficient.
String height (bass string side)|2.3mm above 12th fret
String height(treble string side)|1.6mm above 12th fret
Nut width|43.2mm
Neck thickness(near 1st fret)|21.5mm
Neck thickness (near 12th fret)|23.5mm
SCALE|628mm (24.75")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, as we have checked the rod up to 60 degrees to the left and right (not much left).

Fret Remaining
No problem, there is enough fret height.

String height (bass string side)
2.3mm above the 12th fret

String height (treble string side)
1.6mm above 12th fret

Nut Width
43.2mm

Neck Thickness (near 1st fret)
21.5mm

Neck Thickness (near 12th fret)
23.5mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment