商品情報にスキップ
1 16

USED YAMAHA Yamaha / SG-30 Natural [20]

Serial Number : 27443

[SN 27443] USED YAMAHA Yamaha / SG-30 Natural [20]

Item Code: 20-2800002860026
Condition: USED
Store: [20] fukuoka

通常価格 ¥83,200 JPY
通常価格 セール価格 ¥83,200 JPY
セール 売り切れ
配送料はチェックアウト時に計算されます。
If you would like to make a bank transfer, please give us an e-mail with name of your request item.
inquery
inquery
QQ: 3784816402
For customers residing in Japan
The "SG" series continues to enjoy strong popularity today and has earned a reputation for its high quality.
In 1974, the "SG-175," which became the prototype model of the current SG series with its symmetrical body shape and adoption of arrow design position marks, was released, and this model was sold at a reasonable price.
The body is made of Katsura wood, the neck is mahogany with rosewood fingerboard, and the pickups are Yamaha's original humbuckers "#1157F".

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and mortised.
The neck has a high spring and the frets have been adjusted by fret adjustment, but the frets are very low.

One bushing for the lower joint screw on the 6th string side is missing.
There are scratches, dents, and other signs of use due to age.

Item rank: B+ (Good)

Year of manufacture: 1970s
Truss rod: There is enough room.
Fretboard : Less than 50%.
Accessories : Hard case / Genuine
Country of Origin : JAPAN
Weight : 3.23kg
Serial : 27443

Truss Rod : No problem, confirmed up to 60 degrees to the left and right (with waviness)
Fret remainder is defective and needs to be replaced at the time of next repair.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.2mm
Neck thickness(near 1st fret)|20.2mm
Neck thickness (near 12th fret)|24.3mm
SCALE|628mm (24.75")
RADIUS|254mm (10")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment, and mortise adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
Note: We have checked the rod up to 60 degrees to the left and right, and there is no problem.

Fret remainder
Defective, need to consider replacing at the next repair.

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above the 12th fret

Nut width
42.2mm

Neck Thickness (near 1st fret)
20.2mm

Neck Thickness (near 12th fret)
24.3mm

Scale
628mm (24.75")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
現在も根強い人気を持ち、その質の高さから評判を得ている「SG」シリーズ。
1974年に左右対称のボディ形状、アローデザインのポジションマーク採用など、現在のSGシリーズ原型のモデルとなった「SG-175」が発売され、このモデルはリーズナブルな価格で販売されていたモデルです。
ボディは桂材、ネックはマホガニーにローズウッド指板、ピックアップはヤマハのオリジナルハムバッカー「#1157F」となっております。

* 弊社入荷後、クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・すり合わせを行っております。
ネックに波打ちハイハネ症状が出ており、フレットすり合わせにて調整を行いましたが、フレットがかなり低くなっております。

6弦側下部ジョイントビスのブッシュ1個欠品しています。
経年によるキズや打痕等の使用感がございます。

商品ランク:B+ (良品)

製造年 : 1970年代
トラスロッド : 余裕有り
フレット : 50%以下
付属品 : ハードケース/純正
生産国 : JAPAN
重量 : 3.23kg
シリアル : 27443

トラスロッド|注意点ありロッド左右60度まで確認済みにて問題なし(波打ち有り)
フレット残り|不良あり次回修理時は打ち換えの検討が必要
弦高(低音弦側)|12フレット上 2.0mm
弦高(高音弦側)|12フレット上 1.5mm
ナット幅|42.2mm
ネック厚(1フレット付近)|20.2mm
ネック厚(12フレット付近)|24.3mm
スケール|628mm (24.75")
RADIUS|254mm (10")
セットアップ時の弦|ERNIE BALL 2221 / .010-.046 set
リペア・メンテナンス箇所|クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・すり合わせ

* トラスロッド・フレット残り・弦高などは弊社リペアセンターにてセットアップ・調整時でのセッティング数値でございます。
* こちらの商品は現物1点限りでございます。
複数のモールに掲載されているため、売却に伴う商品情報の削除は迅速を心掛けておりますが必ずしもリアルタイムではございませんので、ご注文後に万一売り切れとなっておりました際は誠に申し訳ございませんがご容赦くださいませ。

specs

トラスロッド
注意点ありロッド左右60度まで確認済みにて問題なし(波打ち有り)

フレット残り
不良あり次回修理時は打ち換えの検討が必要

弦高(低音弦側)
12フレット上 2.0mm

弦高(高音弦側)
12フレット上 1.5mm

ナット幅
42.2mm

ネック厚(1フレット付近)
20.2mm

ネック厚(12フレット付近)
24.3mm

スケール
628mm (24.75")

RADIUS
254mm (10")

セットアップ時の弦
ERNIE BALL 2221 / .010-.046 set

リペア・メンテナンス箇所
クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・すり合わせ

Payment and Shiping

Products are shipped from Japan after the order is processed, Shipping costs are calculated automatically at the checkout page when you select your destination. , Ship worldwide by Japan Post.

Founded in 1938, Ishibashi Music Corporation is one of the busiest and most respected Musical Instrument retail chains in Japan. The company is highly regarded world wide as a reliable seller of top quality secondhand items too. We have over 13 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, Hiroshima,Fukuoka and Shanghai(China). Ishibashi Music Corporation also handles large amounts of NEW, USED and VINTAGE instruments.

詳細を表示する

Please Note

The items name with "USED" are used items, and comes as shown in the pictures so there may be marks of use. All items were tested by our store staff and we test each item one more time before shipping them out to make sure they are fully functional.

All items for sale on ISHIBASHI MUSIC are stock currently available from all of ISHIBASHI stores around Japan. So it might take a few days for shipping.

And there is a chance that they may sell out in our retail location beforehand.

In that case we will cancel the order and refund any payments received.

Buyers are responsible for any and all duty and customs charges that may be incurred.These charges are are not included in the item price or shipping charges.

Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.

These charges are normally collected by the delivering courier company or when you pick the item up.

We are sorry, but we cannot alter the product price upon shipping nor can we call your purchase a gift.

If you want to know about tariff, please consult Customs.

Our business days are from Monday to Friday. We do not ship products on the weekends.

PACKING BOX SIZES

ABOUT US

Ishibashi Music Corporation is one of the largest and most respected Musical Instrument retail chain stores in Japan. The company is highly regarded world wide as a reliable seller of top quality USED and VINTAGE instruments.

Domestically the Ishibashi Music Corporation also handles a large amount of NEW inside of Japan. We have over 11 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, and Fukuoka. Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from.

Please be patient while we do inter-company transfers on your items. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from 10:00am until 6:00pm (Tokyo time zone)

Sale

1 4