USED SCHECTER Schecter / Progauge Artist Series PA-ZK-1 Shinichi Kobayashi Signature Black Turquoise [20]

Shinichi Kobayashi is the author of "Mechanical Training Phrases from Hell," a book published by Litto Music Guitar Magazine.
This is Kobayashi's signature electric guitar, and he has been actively touring not only in Japan but also overseas, including live tours in Mexico and Korea.
Maple top ash back body, maple neck, 24-fret rosewood fingerboard, Seymour Duncan pickups.
This model originally did not have a back panel, but there are marks where it has been installed.

* After it arrived at our store, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, rubbed together, and electrical repairs have been done, so it is in good playing condition.

There is a small floating of paint on the tip of the head.
There are other minor scratches, dents, and other signs of use.

Item rank: B+ (Good)

Truss rod: There is enough room.
Fret: 60-70%.
Accessories: Soft case / Non-genuine arm
Country of Origin ： Japan
Weight ： 3.49kg
Serial ： ZK-059

Truss Rod: No problem, confirmed up to 60 degrees left and right
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.0mm
Neck thickness(near 1st fret)|20.6mm
Neck thickness (near 12th fret)|21.8mm
SCALE|648mm (25.5")
RADIUS|406mm (16")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.0mm

Neck Thickness (near 1st fret)
20.6mm

Neck Thickness (near 12th fret)
21.8mm

Scale
648mm (25.5")

RADIUS
406mm (16")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair