USED Gibson Custom Shop / ES-339 Fat Neck Antique Red [20]

This is an antique red color ES-339 with 1959 spec fat neck (extra thick neck), made in 2008 at the Memphis factory.
The fat and sweet tone is exceptional, and it can produce freely from the glossy sound of jazz and fusion to the modern distorted rock sound.
The fat tone in the low to mid range has a nice edge to it, and the half tone has a nice bounce to it, making it an excellent match for rock and pop music.
The light weight makes it easy to handle on stage, and the fat neck is easy to play in all positions.
This is one that combines sound and condition.
Both front and rear P.U. are equipped with 57Classic.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and electrical repair, so it is in good playing condition.

There are some parts have some cuss marks, minor scratches, small dents, and other signs of use.

Item rank: B+ (Good)

Year of manufacture: Made in 2008
Truss rod: There is enough room.
Fret: 60-70%.
Accessories: Hard Case / Certificate of Authenticity
Country of Origin ： USA
Weight ： 3.41kg
Serial ： CS82464

Truss Rod: No problem, confirmed up to 60 degrees on both sides of the rod.
Fret height: No problem, enough fret height.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.0mm
Neck thickness(near 1st fret)|22.6mm
Neck thickness (near 12th fret)|25.6mm
SCALE|624mm (24.56")
RADIUS|254mm (10")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs&nbspSpecs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
43.0mm

Neck Thickness (near 1st fret)
22.6mm

Neck Thickness (near 12th fret)
25.6mm

Scale
624mm (24.56")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair