USED Fender USA Fender / 1974 Telecaster Deluxe Natural [20]

The Telecaster Deluxe was produced from 1972 to about 1982.
This one was made in 1974.
The 70s Telecaster Deluxe, which is often reissued even in recent years, has a very solid ash body and a wide range humbucker designed by Seth Lover, the developer of PAF, which is characterized by its high frequency and fatness.

* The pods have been replaced except for the front tone (pot date 1377409 ), and the front condenser has probably been replaced as well.
* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, fretted, and nut adjusted, so it is in good playing condition. The frets are low due to fret adjustment.

One knob decoration is missing.
There is a bump on the maple fingerboard from the 1st string side from the 1st floor to the 4th floor.
There are many dents with weather checks, scratches, and paint chips, and there is a strong sense of use.

Item rank: B+ (Good)

Year of manufacture: 1974
Truss rod : There is enough room.
Fretboard: less than 50%.
Accessories ： Hard case / Genuine
Country of Origin ： USA
Weight ： 4.55kg
Serial ： 578791

Truss Rod : No problem, confirmed up to 60 degrees to the left and right.
Fret rests are defective and need to be replaced at the time of next repair.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|40.9mm
Neck thickness(near 1st fret)|20.4mm
Neck thickness (near 12th fret)|22.3mm
SCALE|648mm (25.5")
RADIUS|241mm (9.5")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment, rubbing, nut adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret remainder
Defective, need to consider replacing the frets at the next repair

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above the 12th fret

Nut width
40.9mm

Neck Thickness (near 1st fret)
20.4mm

Neck Thickness (near 12th fret)
22.3mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, nut adjustment