USED Ibanez Ibanez / Artstar AS80 Vintage Burst [20]

The ARTSTAR series was born to mark a new page in Ibanez jazz guitars, inheriting the jazz guitar-making know-how that Ibanez has built up with George Benson, John Scofield, Pat Metheny, and many other musicians since the late 1970s.
The AS80, an entry-level model manufactured until 2002, has a maple body, one-piece maple neck, rosewood fingerboard, and super58 pickups.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, electrical repair, and mortised, so it is in good playing condition.

There is a stain on the clear paint of the head, and there are stains and rust on the parts.
There are other minor scratches, small dents, and other signs of use.

Item rank: B+ (Good)

Year of manufacture: Made in 1998
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Soft case / Non-genuine
Country of Origin ： Korea
Weight ： 3.68kg
Serial ： 8050097

Truss Rod: No problem, confirmed to be 60 degrees left and right
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.0mm
Neck thickness(near 1st fret)|20.9mm
Neck thickness (near 12th fret)|23.2mm
SCALE|628mm (24.75")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment, electrical repair, mortise and tenon adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
43.0mm

Neck Thickness (near 1st fret)
20.9mm

Neck Thickness (near 12th fret)
23.2mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment