USED Electromatic by Gretsch / G2420 Streamliner with Chromatic II Tailpiece Aged Brooklyn Burst [20]

The refreshed G2420 Streamliner delivers excellent performance, sound, and style at an amazing value.
It features a full hollow construction arched maple body with parallel tone bars for rich resonance, deep resonance, and a big-body sound with scale.
It is equipped with Broad'Tron BT-3S pickups.
This pickup uses a combination of Alnico 5 and Alnico 2 magnets to produce a powerful midrange, a tight and full low-end, and a smooth and clear high-end in good balance, giving it a musical resonance.

* It is in good playing condition as it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, grated, and electrical repairs have been done since we received it.

There are some parts have some scuffs and small rust, and overall there are some minor scratches, small dents and other signs of use.

Item rank : B+ (Good)

Year of manufacture : 2017
Truss rod : There is room to spare
Fretboard: 60-70%.
Accessories ： Soft case / Non-genuine
Weight ： 3.06kg
Serial ： IS170206846

Truss Rod : No problem, rod is 60 degrees to the left and right.
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.0mm
Neck thickness(near 1st fret)|21.7mm
Neck thickness(near 12th fret)|-
Scale|628mm (24.75")
RADIUS|305mm (12")
Strings used for setup|D'Addario EXL110 / .010-.046 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
43.0mm

Neck Thickness (near 1st fret)
21.7mm

Neck Thickness (near 12th fret)
-Neck Thickness (near 12th fret)

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair