USED ltd ltd ltd / SLAYER Tom Araya Signature TA-500 Black [20]

Tom Araya model TA-500 is a Slayer, one of the Big 4 thrash metal players.
Very little information is available among the many Tom Araya models, and it features an alder body, mable thru-neck, and rosewood fretboard.
This rare model is equipped with EMG 35-HZ passive pickup and EMG B64 Actip EQ, which are not found on other models.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, neck iron straightened, and electrical repair (balancer pot replaced), so it is in good playing condition.

There are dents with paint chips characteristic of deformation at the top of the head and bottom of the body.
There is a small paint chip on the 1st floor neck, and other minor scratches and dings.

Item rank: B+ (Good)

Truss rod: There is enough room.
Fret: 60-70%.
Attachment ： Soft case / Non-genuine
Country of Origin ： KOREA
Weight ： 3.84kg
Serial ： No serial number

Truss Rod : No problem, confirmed up to 60 degrees on both sides of the rod.
Fret height: No problem, enough fret height.
String height(bass string side)|2.5mm above 12th fret
String height(treble string side)|2.3mm above 12th fret
Nut width|42.0mm
Neck thickness(near 1st fret)|21.5mm
Neck thickness (near 12th fret)|23.0mm
SCALE|864mm (34")
RADIUS|432mm (17")
Strings for setup|D'Addario EXL165 / .045-.105 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, neck ironing, electrical repair (balancer pot replacement)

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs&nbspSpecs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.5mm above 12th fret

String height (treble string side)
2.3mm above 12th fret

Nut Width
42.0mm

Neck Thickness (near 1st fret)
21.5mm

Neck Thickness (near 12th fret)
23.0mm

Scale
864mm (34")

RADIUS
432mm (17")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, neck ironing, electrical repair (balancer pot replacement)