USED Paul Reed Smith Paul Reed Smith / P24 Trem 10TOP Black Cherry [20]

Along with the piezo-loaded bridge, which was created in collaboration with L.R. Baggs, the redesigned circuit board is even smaller than 60% of the original PRS/LR Baggs system to fit inside the back panel of a solid-body guitar, where space is at a premium.
The well-designed controls, which include a 5-way lever switch for a wide range of sound creation, 3-way piezo/mix/magnetic switching, master Vol (magnetic Vol in stereo), magnetic Tone, and piezo Vol (only when connected to the piezo out), are both highly refined and immediately effective. The well-designed controls are both complete and ready-to-use, making this an attractive model.

* The strings have been cleaned, replaced, rod adjusted, octave adjusted, and string height adjusted after arrival at our store, so it is in good playing condition.

There are some parts have some chinks and fine rust, and overall there are some minor scratches, small dents, and other signs of use.
The attached hard case has been decorated and there are tape marks.

Item rank: B+ (Good)

Year of manufacture: 2013
Truss rod: There is enough room.
Fretboard: 60-70%.
Accessories ： Hard Case / Genuine Arm, Spec Tag
Country of Origin ： USA
Weight ： 3.37kg
Serial ： 13 203730

Truss Rod : No problem, confirmed to be 60 degrees to the left and right
Fret height: No problem, enough fret height.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.3mm
Neck thickness(near 1st fret)|21.2mm
Neck thickness (near 12th fret)|23.7mm
SCALE|635mm (25")
RADIUS|254mm (10")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.3mm

Neck Thickness (near 1st fret)
21.2mm

Neck Thickness (near 12th fret)
23.7mm

Scale
635mm (25")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment