USED Fender Mexico Fender / Acoustasonic Player Jazzmaster Ice Blue [20]

The Acoustasonic Player Jazzmaster from the Acoustasonic Player series is carefully crafted at the Ensenada factory in Mexico.
Compared to the American Acoustasonic Jazzmaster made in the USA, the Acoustasonic Player Jazzmaster has a 3-way switch instead of a 5-way switch, 6 voices instead of 10, 2 PUs instead of 3, a 9V battery instead of a rechargeable lithium battery, and a rosewood fingerboard instead of an ebony one, but the wood The wood is the same and is machined with almost the same precision.
The body is larger, so it has a richer sound, and we highly recommend this Acosta Sonic.

* The strings have been cleaned, replaced, rod adjusted, string height adjusted, and rubbed together after arrival at our company.
The neck is in good playing condition, as it has some high-hanging and wavy symptoms, and the frets have been adjusted and the saddle has been adjusted.

There are small dents with dings on the head corners and body top, but the condition is good with only other minor scratches and minor flaws.

Item rank : B+ (Good)

Year of manufacture: Made in 2022
Truss rod : Plenty of room
Fretboard: 80% or more
Accessories ： Gig bag / Genuine
Country of Origin ： Mexico
Weight ： 2.46kg
Serial ： MXA2216716

Truss Rod: No problem, confirmed up to 60 degrees left and right (slight waviness and high spring)
Fret height is sufficient.
String height(bass string side)|2.4mm above 12th fret
String height(treble string side)|2.0mm above 12th fret
Nut width|43.0mm
Neck thickness(near 1st fret)|20.5mm
Neck thickness (near 12th fret)|23.1mm
SCALE|648mm (25.5")
RADIUS|305mm (12")
Strings for setup|D'Addario EJ-16 / .012-.053 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, string height adjustment, and rubbing

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
We have checked the rod up to 60 degrees to the left and right, and there is no problem.

Fret Remaining
No problem, there is enough fret height.

String height (bass string side)
2.4mm above the 12th fret

String height (treble string side)
2.0mm above 12th fret

Nut Width
43.0mm

Neck Thickness (near 1st fret)
20.5mm

Neck Thickness (near 12th fret)
23.1mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
D'Addario EJ-16 / .012-.053 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, string height adjustment, and alignment