USED Fernandes Fernandes / MG-120X Graphic on Black hide Model [20]

The MG-120X is a psychedelic paint job of one of X Japan's Hide's iconic guitars.
The model was scanned from the original and graphically reproduced, with Hide himself using Posca to draw on the body, head, and even the pickups.
The thin neck shape boasts high playability, and controls such as volume, PU selector, and direct switch are equipped with humbucker pickups.

* After it arrived at our store, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and rubbed together.
The neck has some rippling symptoms, and has been adjusted by fret fret adjustment.
The frets are low due to fret adjustment, but the playing condition is good.

There are some rusts and scratches on the gold parts.
There are dents with paint cracks on the back and corners of the body.
There are other minor scratches and dings.

Item rank: B+ (Good)

Truss rod : There is enough room.
Fretboard : Less than 50%.
Accessories: Gig bag/not genuine
Weight ： 3.66kg
Serial : No

Truss Rod : No problem (Wavy)
Fret remainder is defective and needs to be replaced at the time of next repair.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|41.8mm
Neck thickness(near 1st fret)|19.3mm
Neck thickness (near 12th fret)|21.3mm
SCALE|628mm (24.75")
RADIUS|356mm (14")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment, and mortise adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
Note: We have checked the rod up to 60 degrees to the left and right, and there is no problem.

Fret remainder
Defective, need to consider replacing at the next repair.

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above the 12th fret

Nut width
41.8mm

Neck Thickness (near 1st fret)
19.3mm

Neck Thickness (near 12th fret)
21.3mm

Scale
628mm (24.75")

RADIUS
356mm (14")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing