USED Fender Japan Fender Japan / MG69-75 Old Candy Apple Red [20]

Matching head color '69 model mustang.
With a compact body and short scale set, this model was made as a student model, but it has long been popular in Japan and has become one of the most popular models in FENDER JAPAN.
Based on a basswood body, maple neck, and rosewood fingerboard material, it is equipped with two Japanese-made MG SINGLE pickups.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, rubbed together, and electrical repairs have been done, so it is in good playing condition.

The arm is missing.
There are paint chips and cracks on the top corner and sides of the head.
There is a crack in the clear paint at the neck joint.
There are dents on the 5F and 6F fingerboards, and dents on the top and sides of the body.
There are noticeable scratches on the body back, and there are some parts that have some cracks and minor rusting.
There are other minor scratches, small dents, and other signs of use.

Item rank: B (average)

Year of manufacture: 2007-2010
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Soft case / Non-genuine
Country of Origin ： Japan
Weight ： 3.10kg
Serial ： MIJ T078303

Truss Rod: No problem, confirmed up to 60 degrees on both sides of the rod
Fret height: No problem, enough fret height.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|40.0mm
Neck thickness(near 1st fret)|21.2mm
Neck thickness (near 12th fret)|23.1mm
SCALE|610mm (24")
RADIUS|184mm (7.25")
Strings for setup|D'Addario EXL110 / .010-.046 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs&nbspSpecs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
40.0mm

Neck Thickness (near 1st fret)
21.2mm

Neck Thickness (near 12th fret)
23.1mm

Scale
610mm (24")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair