USED Gibson USA Gibson / 1975 MARAUDER Natural [20]

This is a Gibson 1975 MARAUDER.
We have determined that it is a 1975 because the serial decal with the first two digits starting with 99 and the POT date indicates the year 75.
The electrical system is original, and the pegs have been replaced.
It has a slightly rounded sound, and is constructed with an alder body, bolt-on maple neck, and rosewood fingerboard, which is not typical of Gibson.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, and string height adjusted, so it is in good playing condition.
The frets are low, but this is not a problem.

The pegs have been replaced and there are screw holes.
The Gibson logo is chipped, and there are some parts that have some chips, minor rust, and floating chrome.
There is clear paint peeling on the neck and body contour area due to playing.
There is paint peeling from scratches on the back of the body, and there are numerous dents and dings with paint cracks throughout the body.

Item rank: B+ (Good)

Year of manufacture: 1975
Truss rod : There is enough room
Fretboard: less than 50%.
Accessories ： Hard case / Non-genuine
Country of Origin ： USA
Weight ： 3.56kg
Serial ： 99134620

Truss Rod : No problem.
Fretboard: Still good for cutting, but the frets are low.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.0mm
Neck thickness(near 1st fret)|19.8mm
Neck thickness (near 12th fret)|24.3mm
SCALE|628mm (24.75")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fretboard Remaining
Still can withstand cutting, but the frets are low.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
43.0mm

Neck Thickness (near 1st fret)
19.8mm

Neck Thickness (near 12th fret)
24.3mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment