USED Taylor Taylor / 2008-HR-LTD Hot Rod Hotei Signature [20]

The "2008-HR-LTD Hot Rod Hotei Signature" was a limited edition of 42 pieces produced by Taylor in 2008.
Using the limited edition as a base model, and incorporating Mr. Hotei's requests, the body was made a little smaller than the 2003 model, and the 42-piece limited edition was produced as Mr. Hotei's signature model.
The body has a grand auditorium shape, with spruce on the top and maple on the sides and back.
The body has a sharply pointed florentine cutaway and a glossy black gloss finish.
The fretboard and soundhole rosette are decorated with a fire pattern formed by combining different colored woods in a "yosegi" style.

* After our arrival, it has been cleaned, string replaced, rod adjusted, string height adjusted, and rubbed together, so it is in good playing condition.

There are some parts with some cracks, a small ding on the front right side of the body top, and the paint is cracked on the end of the neck.
There are also some other minor scratches and dings.

Item rank: B+ (Good)

Year of manufacture: 2008
Truss rod: There is enough room.
Fret: 60-70%.
Accessories: Hard Case / Certificate of Authenticity
Country of Origin ： USA
Weight ： 2.30kg
Serial ： 20080606144

Truss Rod: No problem, confirmed to be 60 degrees to the left and right
Fret height is sufficient.
String height(bass string side)|2.5mm above 12th fret
String height(treble string side)|2.0mm above 12th fret
Nut width|44.0mm
Neck thickness(near 1st fret)|21.5mm
Neck thickness(near 12th fret)|-
SCALE|648mm (25.5")
RADIUS|356mm (14")
Strings used for setup|D'Addario EJ-16 / .012-.053 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, string height adjustment, and rubbing

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.5mm above 12th fret

String height (treble string side)
2.0mm above 12th fret

Nut Width
44.0mm

Neck Thickness (near 1st fret)
21.5mm

Neck Thickness (near 12th fret)
-Neck Thickness (near 12th fret)

Scale
648mm (25.5")

RADIUS
356mm (14")

Strings for setup
D'Addario EJ-16 / .012-.053 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, string height adjustment, and alignment