USED GRECO Greco / EG700 Red Sunburst [20]

LP type EG700 with plain maple 2P top & solid mahogany back body, rosewood fingerboard mahogany neck.
The pickups are probably original and according to the documents, U-2000 pickups are installed, which output a slightly hard and bouncy humbucker sound.

There are some parts that have some chinks, rust, floating or peeling plating, etc. The top corner of the head has some paint chips.
There are several dents with paint chips on the top corner of the head, and there are dents with paint cracks and dings on the top of the body near the controls and under the bridge.
There are many scratches and dents with paint dents and paint chips on the center of the body back, and many small dents with paint dents on the lower part of the body back and sides of the body.
There are other minor scratches and dings.

Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, and electrical repair

Item rank: B+ (Good)

Year of manufacture: 1981
Truss rod: Nearly fully tightened
Fretboard : 60-70%.
Accessories: Gig bag/not genuine
Country of Origin ： Japan
Weight ： 3.89kg
Serial : 1 0635

Truss Rod: No problem, confirmed to 60 degrees left and right.
Fret height is sufficient.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.6mm
Neck thickness(near 1st fret)|21.6mm
Neck thickness (near 12th fret)|24.9mm
SCALE|628mm (24.75")
RADIUS|184mm (7.25")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, as we have checked the rod up to 60 degrees to the left and right (not much left).

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
43.6mm

Neck Thickness (near 1st fret)
21.6mm

Neck Thickness (near 12th fret)
24.9mm

Scale
628mm (24.75")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair