USED Fender Custom Shop / MBS Custom 54 Stratocaster NOS Gold Build by Todd Krause [20]

Custom Shop Stratocaster made by Senior Master Builder Todd Krause.
The body is made of ash with a 7.25" radius fingerboard with a soft V shape and a one-piece maple neck that boasts excellent playability.
The pickups are believed to be original, although there is no evidence that they have been replaced and the model name is unknown.

There are some parts that have some rust and scratches.
There are paint chips and stains on the corner next to the head logo and around the bottom of the 6th string peg post.
There are additional cracks and peeling paint. There are several large dents with paint chips and wood chips, especially on the body back contour and body back corners, and several large dents with paint chips on the corners of both sides of the body.
The pickguard and back panel screws are cracked, and the pickguard is bent due to shrinkage.
There are other scratches and dents with paint chips, and the guitar has a slightly strong feeling of use.

After our arrival, cleaning, string replacement, rod adjustment, octave adjustment, and string height adjustment have been done.

Item rank: B+ (Good)

Year of manufacture: 2002
Truss rod: Nearly fully tightened
Fretboard : 60-70
Accessories ： Hard Case / Genuine Arm, Bridge Cover, Certificate
Country of Origin ： USA
Weight ： 3.41kg
Serial ： TK141

Truss Rod : No problem (only a little left)
Fret height is sufficient.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.1mm
Neck thickness(near 1st fret)|22.5mm
Neck thickness (near 12th fret)|25.5mm
SCALE|648mm (25.5")
RADIUS|184mm (7.25")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, as we have checked the rod up to 60 degrees to the left and right (not much left).

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
42.1mm

Neck Thickness (near 1st fret)
22.5mm

Neck Thickness (near 12th fret)
25.5mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment