USED Ibanez Ibanez / JPM100 P2 John Petrucci [20]

The JPM100 is known as the early signature model of John Petrucci, guitarist for the progressive metal band Dream Theater.
It is also known by the nickname "Picasso Guitar" due to its unique artwork.
The body is made of American basswood, and the neck is maple with a rosewood fingerboard.
Original DiMarzio DP193 (front) and DP161 (rear) pickups are equipped.
Controls are 3-way selector and 1 volume/1 tone.
The frets have been replaced with stainless steel.

There is a ding with a wood dent on the side of the head apex.
There are cracks in the paint on the body top and body back contour, and clear peeling on the neck around the 8th floor.
There is a paint chip on the front of the body at the top of the right horn section, and there are dents with small paint chips on the sides and corners of the body.
Other parts have some chipping and minor rust, and there are overall signs of use such as line scratches and small dents.

After our arrival, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and electrical repair were performed.

Item rank: B+ (Good)

Year of manufacture: 1996
Truss rod: There is enough room.
Fretboard : 80% or more
Accessories ： Hard case / Genuine arm
Country of Origin ： JAPAN
Weight ： 3.41kg
Serial ： F606619

Truss Rod : No problem, confirmed up to 60 degrees left and right
Fretboard: No problem, same condition as brand new.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.5mm
Neck thickness(near 1st fret)|19.5mm
Neck thickness (near 12th fret)|22.1mm
SCALE|648mm (25.5")
RADIUS|406mm (16")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

Specs

No truss rod problem.

No fret remainder problem, same condition as new.

String height (bass string side) 2.0mm above 12th fret

String height (treble string side) 1.5mm above 12th fret

Nut width 42.5mm

Neck thickness(near 1st fret)19.5mm

Neck thickness (near 12th fret)22.1mm

SCALE648mm (25.5")

RADIUS406mm (16")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair