USED Fender Custom Shop / 1964 Jazz Bass NOS 3 Tone Sunburst [20]

The Time Machine series pays homage to traditional designs, employing the same machinery and manufacturing techniques as in those days whenever possible.
This is one of the New Old Stock (N.O.S.) models, the concept of which is to use a time machine to bring instruments from that era into the modern age.
It is an attractive model with carefully selected alder body material, C-shape maple neck, round laminated rosewood fingerboard, vintage style pickups, spiral saddle bridge, and reverse tuning machine, which is a legitimate inheritance of the original specs. The model is equipped with a rosewood fingerboard, a spiral-saddle bridge, and a reverse tuning machine.

The bridge cover, pickup fence, and certificate are missing, and the neck Date indicates that it was made in 2000.
The neck has a high spring condition, and has been adjusted by fret adjustment.
There are several small dents with paint cracks and dents on the corners of both sides of the head, and the clear paint on the neck is burned black.
There are many dents with paint chips, cracks, and dents on both sides of the body, and there are many small dents with dents all over both sides of the body.
There are some parts that have some scuffs and rust, and overall the instrument shows signs of use, such as line scratches and small dents.

After arrival, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair, and end pin hole correction

Item rank: B+ (Good)

Year of manufacture: Made in 2000
Truss rod: There is enough room.
Fretboard: 60-70%.
Accessories ： Hard case / Non-genuine
Country of Origin ： USA
Weight ： 3.97kg
Serial ： R7335

Truss Rod: No problem, confirmed up to 60 degrees left and right (with high spring)
Fret height is sufficient.
String height (bass string side)|2.5mm above 12th fret
String height(treble string side)|2.0mm above 12th fret
Nut width|38.3mm
Neck thickness(near 1st fret)|20.2mm
Neck thickness (near 12th fret)|24.3mm
SCALE|864mm (34")
RADIUS|184mm (7.25")
Strings for setup|D'Addario EXL165 / .045-.105 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

Specs

Truss rod is fine (with high spring).

No fret remainder problem, enough fret height.

String height (bass string side): 2.5mm above the 12th fret

String height (treble string side) 2.0mm above the 12th fret

Nut width 38.3mm

Neck thickness(near 1st fret)20.2mm

Neck thickness (near 12th fret)24.3mm

Scale864mm (34")

RADIUS184mm (7.25")

Strings for setup D'Addario EXL165 / .045-.105 set

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair