USED GRECO Greco / GO-700 Natural [20]

Greco Japan Vintage 1978 GO700.
It has a unique look with a design that is said to be Allen Big style, Les Paul type shape and through neck.
The natural wood grain is a characteristic of this guitar.

After our arrival, the mold of the rear PU had cracked and separated from the cover due to deterioration, so it has been glued and the rear PU mounting screws have been replaced.
There is no same type of switch that is defective, and it has been changed to tilt parallel to the strings, and the rear vol and front tone pots have been replaced.
The neck has a rippling symptom and has been fretted and the nut has been adjusted.
The frets have been lowered considerably due to the fret adjustment.

There are numerous dents with paint cracks and chips on the corners of both sides of the head, and there are numerous dents with dents throughout the body.
There are some parts that are stained and rusted, and there are overall signs of use such as line scratches and dents.

After arrival, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair, nut adjustment

Item rank: B (average)

Year of manufacture: 1978
Truss rod : There is enough room.
Fretboard : Less than 50%.
Attachment ： Soft case / Non-genuine
Country of Origin ： JAPAN
Weight ： 4.09kg
Serial ： B786754

Truss rod: No problem (slight waviness)
Fret remainder is defective and needs to be replaced when it is repaired next time.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.4mm
Neck thickness(near 1st fret)|20.4mm
Neck thickness (near 12th fret)|22.6mm
SCALE|628mm (24.75")
RADIUS|254mm (10")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair, nut adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

Specs

Truss rod has a note, and we have checked the rod up to 60 degrees to the left and right, and there is no problem.

Fret remainder is defective and needs to be replaced at the time of next repair.

String height (bass string side): 2.0mm above the 12th fret

String height (treble string side): 1.5mm above the 12th fret

Nut width 43.4mm

Neck thickness(near 1st fret)20.4mm

Neck thickness (near 12th fret)22.6mm

Scale628mm (24.75")

RADIUS254mm (10")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair, nut adjustment