USED Fender USA Fender / 1973 Mustang Bass Competition Red [20]

Competition Striped 1973 Mustang Bass with competition stripes from 1969 to about 1972.
The serial number is 1972, pickup Date (143873), and pot Date (1377310), so we assume it was made in 1973.
This guitar is easy to handle and has a tight and fat sound. It has a vintage tone and atmosphere.

Pickups: Yellow Black Vinyl Wire Type Back 143873 Stamp
Volume, Tone Pot 032367 250K-A 1377310 stamped
Capacitor: Ceramic type, yellowish-black 05M 100V stamped
Jack SWITCHCRAFT

The bridge mute sponge is missing, there is a lot of rust on metal parts, and there are sticker marks and graffiti on the pickguard.
There are dings with paint chips on the 2F-5F neck, and many small dings with dents and paint chips from the head to the neck.
There is a strap pin installed and a hole filled in the left front horn area.
There are paint chips, dents, and sticker marks on the back of the body.
There are strong weather checks all over the body.
There are numerous scratches and dents throughout, and the guitar has a strong sense of use.

After receiving the guitar, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, control pot cleaning, jack contact cleaning, 1st string peg shaft fixing screws installed, strap installed in original position (fix loose screw holes and fill in other holes), pickguard saguri paint removal fix, bass string side Pickup mount screws x1 replaced, pickup mount rubbers x4 installed, all saddle tweezers fixed, sticker removed from body back at 1 location

Item rank: B (average)

Year of manufacture: 1973
Truss Rod ： Enough room
Fret: 60-70%.
Accessories : Gig bag/not genuine
Country of Origin ： USA
Weight ： 3.63kg
Serial : 342307

Truss Rod: No problem, confirmed to be 60 degrees to the left and right
Fret height: No problem, enough fret height.
String height(bass string side)|2.5mm above 12th fret
String height(treble string side)|2.0mm above 12th fret
Nut width|40.8mm
Neck thickness(near 1st fret)|21.5mm
Neck thickness (near 12th fret)|25.0mm
SCALE|762mm (30")
RADIUS|184mm (7.25")
Strings for setup|D'Addario EXL170M / .045-.100set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, control pot cleaning, jack contact cleaning, 1st string peg shaft fixing screws installed, strap installed in original position (fix loose screw holes, fill in other holes), pickguard saguri paint Pickguard saguri removal and correction, replacement of 1 pickup mount screw on bass string side, installation of 4 pickup mount rubbers, correction of sticking of all saddle torsion screws, removal of 1 sticker on the body back

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

Specs

No truss rod problem.

No fret remainder problem, enough fret height.

String height (bass string side): 2.5mm above 12th fret

String height (treble string side) 2.0mm above 12th fret

Nut width 40.8mm

Neck thickness(near 1st fret)21.5mm

Neck thickness (near 12th fret)25.0mm

SCALE762mm (30")

RADIUS184mm (7.25")

Strings D'Addario EXL170M / .045-.100set at setup

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, control pot cleaning, jack contact cleaning, 1st string peg shaft fixing screws installed, strap installed in original position (fix loose screw holes, fill in another hole), pickguard saguri paint removal Fixed, replaced 1 pickup mount screw on bass string side, installed 4 pickup mount rubbers, fixed sticking of all saddle torsion screws, removed sticker on one spot on body back