USED Charvel Charvel / Pro-Mod DK24 HH 2PT CM Satin Burgundy Mist [20]

Alder was selected for the body, which produces a clean sound from low to high frequencies, and caramelized maple was used for the graphite-reinforced 25.5" scale neck and 24-fret fingerboard. The pickup system is a combination of Seymour Duncan's SH-10B and APH-1N in the HH layout.
The mini-switch between volume and tone can be used to change each humbucker to a pseudo single coil sound.

There is a slight darkening on the fingerboard, and the satin paint is shiny due to picking on a part of the body top.
There is a ding on the top of the head with a dent, and some parts have some rust and some fine rust, and there are other signs of use such as fine line scratches and small dings.

After arrival, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing.

Item rank: B+ (Good)

Year of manufacture: Made in 2021
Truss rod : Plenty of room
Fretboard: 60-70%.
Accessories ： Soft case / Non-genuine tremolo arm
Country of Origin ： Mexico
Weight ： 3.39kg
Serial ： MC21003610

Truss Rod : No problem, confirmed to be 60 degrees to the left and right
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|44.0mm
Neck thickness(near 1st fret)|20.0mm
Neck thickness (near 12th fret)|21.0mm
SCALE|648mm (25.5")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

Specs

No truss rod problem.

No fret remainder problem, enough fret height.

String height (bass string side) 2.0mm above 12th fret

String height (treble string side) 1.5mm above 12th fret

Nut width 44.0mm

Neck thickness(near 1st fret)20.0mm

Neck thickness (near 12th fret)21.0mm

Scale648mm (25.5")

RADIUS305mm (12")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment