USED Greco Greco / EG600B [20]

It is difficult to determine the age of the pickguard, control knob, bridge, tailpiece, and many other parts that have been replaced, but it is believed to be an EG600B based on the age and use of inlays and other parts.
The body is birch, the neck is maple with rosewood fingerboard wood material, and the guitar is equipped with the original U-1000 humbucking pickups.

* The truss rod is completely loose and the neck is slightly inverted, but it does not interfere with playing.

There is a scratch on the end of the body where the paint is peeling and gouged.
Paint is cracked at the neck joint. There are many scratches and dents from the body to the tip of the head.
Gold parts have peeling plating due to aging.
Part of the metal jack plate is missing and looks as if it has been subjected to a strong impact.

After arrival, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, front escutcheon replacement, front and rear escutcheon screw replacement, jack replacement, front and rear tone pot cleaning, all 7 cavity panel screws looseness correction, strap pin replacement, and Jack plate screws replaced.

Item rank: B (average)

Year of manufacture: 1977
Truss Rod : Loose
Fretboard: 60-70%.
Accessories : Soft case / non-genuine
Weight ： 3.90kg
Serial ： K777151

Truss Rod: No problem (only a little left), with a note that the rod has been checked up to 60 degrees left and right.
Fretboard: No problem, sufficient fretboard height.
String Height Low String Side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 44.0mm
Neck thickness near 1st fret: 20.8mm
Neck thickness near 12th fret: 23.8mm
SCALE: 628mm (24.75")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, front escutcheon replacement, front and rear escutcheon screw replacement, jack replacement, front and rear tone pots cleaned, all 7 cavity panel screws loosened and corrected, strap pins replaced, jack plate screws replaced, and jack plate screws replaced. Jack plate screws replaced.

* There are some scratches, dents, etc. that are difficult to see in the photos or that are not shown in the listing because of the used condition. Please note that there are scratches, dents, etc. that are difficult to see in the photos.

* The truss rod, remaining frets, and string height, if indicated, were measured by our staff at the time of setup, and may change due to climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.