USED Ibanez Ibanez / J Custom RG8570Z Black Rutile [20]

Ibanez's flagship model RG8570Z is carefully assembled by skilled craftsmen using carefully selected woods.
The top is made of North American flame maple with attack and sustain, and the sound is very well-balanced.
The pickups are Air Norton for clear and warm sound at the neck position, DiMarzio True Velvet for bright and low-noise sound at the middle position, and The Tone Zone for well-balanced output from high to low range and full of power at the bridge position. The bridge position is equipped with The Tone Zone, which has a well-balanced output from high to low frequencies and a powerful sound.

The high frets have been shaved off to create a high neck, and the frets near the end of the neck are low.
The strings are set at a slightly lower height, but there is no sound clogging.
Paint is cracked on both sides of the neck joint.
Paint is peeling at the end of the body.
There are other minor scratches, small dents, and dull metal parts.

After receiving the guitar, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and mortised.

Item rank: B+ (Good)

Year of manufacture: Made in 2020
Truss rod: There is enough room.
Fretboard : 60-70
Accessories ： Hard case / Genuine arm, Lock pin
Country of Origin ： Japan
Weight ： 3.67kg
Serial ： F2021604

Truss Rod: No problem, as confirmed by checking the rod to 60 degrees left and right (with high spring).
Fretboard: No problem, sufficient fretboard height.
String height on bass string side: 1.7mm above 12th fret
String height on treble string side: 1.4mm above 12th fret
Nut width: 43.6mm
Neck thickness near 1st fret: 17.1mm
Neck thickness near 12th fret: 19.6mm
SCALE: 648mm (25.5")
RADIUS: 381mm (15")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.