USED momose momose / MJM1-STD Black [20]

This JM type model with an alder body is manufactured by Momose, a company that produces high quality instruments by craftsmen in Matsumoto City, Nagano Prefecture.
The wide pickup construction and the position of the tailpiece give it a milder sound than the ST and TL.
It was preferred by SURF music guitarists rather than JAZZ guitarists, but recently it has been widely used for ROCK and POPS.
Although this design tends to produce a loose sound, the tight construction of the MOMOSE makes its charms apparent.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, rubbed together, and electrical repair, so it is in good playing condition.

The arm is missing.
There is a ding on the top of the head with paint chips and wood dents.
There is a ding on the bottom corner of the body with wood chips, and overall there are many scratches, paint dings, and chips.

Item rank: B+ (Good)

Truss rod: There is enough room.
Fretboard: 60-70%.
Accessories: Gig bag/not genuine
Country of origin: Japan
Weight ： 3.51kg
Serial : 5380

Truss Rod : No problem, rod is 60 degrees to the left and right.
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.2mm
Neck thickness(near 1st fret)|21.1mm
Neck thickness (near 12th fret)|23.6mm
SCALE|648mm (25.5")
RADIUS|241mm (9.5")
Strings for setup|D'Addario EXL110 / .010-.046 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.2mm

Neck Thickness (near 1st fret)
21.1mm

Neck Thickness (near 12th fret)
23.6mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair