USED FENDER / Telecaster 3CS 1983 [03]

Rare spec 1983 Telecaster is now in stock!
This is one of the last models made in the Fullerton factory period before the sale of CBS to Fender in 1985, and was manufactured for only two years from 1983 to 1984.
It was manufactured for a short period of time from 1983 to 1984, and is now gaining in popularity and reputation as a vintage model, and its market price is rising.

The head serial number and non-serial F logo engraved joint plate are based on the characteristics of this period, but it also has a top-loaded bridge and six F saddles, which can only be found in a pinpoint period in the 80's. The most distinctive feature is the neck, which has a very unique design.

The most distinctive feature is the neck, which has a one-piece soft V-maple neck and sharp fingerboard edges that give it a grip unmatched by any Fender.
The rod still has plenty of adjustment range, and the frets and nut are in good condition, showing no signs of wear.

On the other hand, the sound is royal, offering a moderate sense of separation and attack.
The weight is neither excessively heavy nor excessively light, making it a very easy-to-use instrument.

The original hard-shell case is also included.
Please take this opportunity to own this unique and rare semi-vintage Telecaster!

S/N: E 311288
Weight: 3.48kg

Rank: B+
This is a very beautiful instrument for its age, with some minor pick scratches and scuffs.
Parts are in good condition with almost no dulling.

Accessories: Genuine hard case only

S/N:E311288
Vol Pot: Unable to confirm due to solder
Tone Pot:137-8331
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Remaining: No problem, sufficient fret height.
Nut Width:43.50mm
Neck Thickness (near 1st fret):20.33mm
Neck thickness (near 12th fret): 21.55mm
Scale:648mm (25.5")
RADIUS:241mm (9.5")
Serial Number:E311288
Weight:3.48kg

* Due to the nature of this product, we will not be able to show or move it to other Ishibashi Gakki stores. Please understand this in advance.
Please contact the Ochanomizu Main Store for further information.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: E 311288
Country of manufacture: U.S.A.
Case: Hard Case
Weight: 3.48kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard is high enough.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.50mm
Neck thickness near 1st fret: 20.33mm
Neck thickness near 12th fret: 21.55mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
E 311288

Country of manufacture
United States of America

Case
Hard Case

Weight
3.48kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.50mm

Neck thickness near 1st fret
20.33mm

Neck thickness near 12th fret
21.55mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing