USED FENDER / 1980 Precision Bass MOD [05]

1980 Precision Special LPB is now in stock at an affordable price.

The pegs, bridge, joint plate, and other iconic hardware of this model have been retained, but the active circuit has been removed and the pickguard has been replaced.

The pickguard has been replaced and the active circuit has been removed. The playability issues have been resolved in our repair shop, and the guitar should play with no stress.
The body is made of white ash, which is typical for this age, and the weight is over 5 kg, giving it a powerful and bright tone.

Weight 5.17kg
Comes with an external hard case

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: E013969
Year of manufacture: 1980
Country of manufacture: USA
Case: External hard case
Weight: 5.17kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right.
Fret Depth: Still good for cutting, but the frets are low.
String Height Low String Side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 41.5mm
Neck thickness near 1st fret: 21.1mm
Neck thickness near 12th fret: 23.6mm
SCALE: 864mm (34")
RADIUS: 241mm (9.5")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, ironing, mortise and tenon adjustment, hole filling

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup, and may vary due to climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
E013969

Year of manufacture
1980

Country of manufacture
U.S.A.

Case
External hard case

Weight
5.17kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
Still can withstand cutting, but the frets are low.

String Height Low String Side
2.5mm above 12th fret

High string on treble string side
2.0mm above the 12th fret

Nut width
41.5mm

Neck thickness near 1st fret
21.1mm

Neck thickness near 12th fret
23.6mm

Scale
864mm (34")

RADIUS
241mm (9.5")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, ironing correction, mortise and tenon adjustment, hole filling