USED FENDER USA / American Vintage 62 Stratocaster Ocean Turquoise Metallic [06]

This is an American Vintage Series 62 Strat made in 1992!
The color is turquoise green under the pickguard, and the warranty states OT, so this is an original Ocean Turquoise Metallic Strat. The color is turquoise green under the pickguard, and the warranty card also shows OT, so it is the original Ocean Turquoise Metallic. There is some paint peeling around the neck joint plate that seems to be caused by pressure from over-tightening the screws, but other than that, there are only one or two chips on the top and back, each about the size of a grain of rice. The pickups are also judged to be original, as there is no evidence of solder being removed from the pots in 1992. The truss rod is confirmed to operate up to 60 degrees to the left and right, and the rod cap seen from the pickguard is in good condition with sufficient tightening width remaining. The back panel has been removed but is still included (set screws are missing).
The back panel has been maintained after arrival, and considering the age, the overall condition is quite good. If you are looking for a good Amebin 62 Strat, this is an item you should check out!
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: V059421
Year of manufacture: 1992
Country of manufacture: USA
Case: Hard Case
Accessories: Certificate, arm, selector
Weight: 3.55kg
Truss Rod: No problem, rod checked to 60 degrees left and right, no problem
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.40mm
Neck thickness near 1st fret: 20.72mm
Neck thickness near 12th fret: 22.37mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, burr removal, nut adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to the effects of climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
V059421

Year of manufacture
1992

Country of manufacture
U.S.A.

Case
Hard Case

Accessories
Certificate, arm, selector

Weight
3.55kg

Truss Rod
No problem, rod checked up to 60 degrees to the left and right.

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.40mm

Neck thickness near 1st fret
20.72mm

Neck thickness near 12th fret
22.37mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, rubbing, gouge removal, nut adjustment