USED FENDER USA / JOHNNY MARR JAGUAR OWT [06]

FENDER USA JOHNNY MARR JAGUAR OWT Used in stock now!
Made in USA in 2024.
This is the signature model of Johnny Marr, known as a guitarist, arranger, and songwriter.
Rich with special features, this model is based on Johnny's modified 1965 Jaguar and features specifications ideal for the discerning and unconventional guitarist.
It features an alder body, maple neck, and rose fingerboard.
The pickups are two Custom-Wound Bare Knuckle Johnny Marr.
A 4-position blade pickup switch and two slide switches located on the upper horn allow for a wide range of sound makeup.
There are some minor scratches, dings, and dull metal parts, but it is in clean condition for a used instrument.
It has been cleaned and adjusted after arrival, and there are no playing problems.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: V2432315
Country of manufacture: U.S.A.
Case: Hard Case
Accessories: Arm, wrench, bridge cover
Weight: 4.08kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass string: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.45mm
Neck thickness near 1st fret: 21.47mm
Neck thickness near 12th fret: 25.43mm
SCALE: 610mm (24")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, nut adjustment

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If there are descriptions of truss rod, remaining frets, or string height, they were measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
V2432315

Country of manufacture
United States of America

Case
Hard Case

Accessories
Arm, wrench, bridge cover

Weight
4.08kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right

Leftover frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.45mm

Neck thickness near 1st fret
21.47mm

Neck thickness near 12th fret
25.43mm

Scale
610mm (24")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, nut adjustment