USED Fender USA / American Ultra Stratocaster Rosewood Fingerboard Arctic Pearl [3.45kg / made in 2023]

This is a Fender USA American Ultra Stratocaster 2023 with cutting-edge specs.

It features modern specs such as Ultra Noiseless pickups, neck joint/body contour, 10-14" compound radius fingerboard, locking tuners, and treble bleed circuit.

It has an alder body, modern D-shaped maple neck, rose fretboard, 3 x Ultra Noiseless Vintage Strat single PUs, and S-1 switch on the Vol knob. This guitar boasts high playability, a tone with presence, and a wide variety of sound variations.

The pickguard and back panel have been replaced (no screw holes have been changed), and it shows signs of use (paint cracks at the joint, minor scratches and scuffs around the perimeter, scratches and scuffs from playing, picking marks, fogging and bits on metal parts and screws, and other exterior damage).

The fretboard has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and fret adjustment) upon arrival, and the fret board is high enough for playing.

* The truss rod has been checked to 180° on the tightening side and is in good condition.
* Please note that this is a used item and there are scratches, dents, etc. from use that may not show up in the photos. Please understand this in advance.
Product rank: B+: There are some scratches, but no problem in the normal use

Serial number: US23032534
Year of manufacture: 2023
Country of manufacture: USA
Case: Hard Case
Accessories: Arm, Lock pin hardware
Weight: 3.45kg
Truss Rod: Tightened to 180°.
Fretboard: No problem, sufficient fretboard height.
String height on bass side: 2.1mm above 12th fret
String height on treble string side: 1.8mm above 12th fret
Nut width: 43.1mm
Neck thickness near 1st fret: 20.9mm
Neck thickness near 12th fret: 22.4mm
SCALE: 648mm (25.5")
RADIUS: 10"-14" compound-radius
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial number
US23032534

Year of manufacture
2023

Country of manufacture
U.S.A.

Case
Hard Case

Accessories
Arm, Lock pin hardware

Weight
3.45kg

Truss Rod
Checked to 180° on the tightening side

Fret remaining
No problem, sufficient fret height

String Height Low String Side
2.1mm above 12th fret

String height on treble string side
1.8mm above the 12th fret

Nut width
43.1mm

Neck thickness near 1st fret
20.9mm

Neck thickness near 12th fret
22.4mm

Scale
648mm (25.5")

RADIUS
10"-14" compound-radius

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment