USED Fender Japan / ST62-58US OCR Old Candy Apple Red [3.48kg / 1995-1996]

A '62 style Strat with USA vintage pickups, slabbed rose fingerboard and spaghetti logo.

Fender Japan Stratocaster ST62-58US, made in 1995-1996. Basswood body, maple neck, 7.25R rose fingerboard, 11-point pickguard, and USA Vintage Strato PU.

This guitar has the look and feel of yesteryear, with an easy-to-use all-around sound.

Jack replaced with PURE TONE JACK, selector SW replaced. It shows signs of use (color fading, scratches, scuffs and scratches, scuffs and scratches from playing, picking marks, rust on pegs, cloudy/bitz/rust on metal parts and screws, and other exterior damage).

The fretboard has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, switch replacement) upon arrival. The fretboard is originally thin and low, but the fretboard is high enough for playing.

* The truss rod has been checked to 60 degrees to the left and right and is in good condition.
* Please note that there are scratches, dents, and other blemishes that may not show up in the photos. Please understand this in advance.
Product rank: B+: There are some scratches, but no problem in the normal use

Serial number: U011802
Year of manufacture: 1995-1996
Country of manufacture: Japan
Case: Soft case (not genuine)
Accessories: Arm
Weight: 3.48kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height
Nut width: 412.4mm
Neck Thickness near 1st fret: 20.9mm
Neck thickness near 12th fret: 22.9mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Modification: Jack replaced with PURE TONE JACK
Repair/Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, switch replacement

* Please note that this is a used item and there may be scratches, dents, etc. that are not easily seen in the photos or scratches other than those listed. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: There are some scratches, but no problem in normal use.

Serial number U011802

Year of manufacture 1995-1996

Country of manufacture Japan

CaseSoft case (not genuine)

AccessoriesArm

Weight3.48kg

No truss rod problemNo problem when rod is checked up to 60 degrees to the left and right.

No fret remainder problem, sufficient fret height

Nut width 412.4mm

Neck thickness: 20.9mm near the 1st fret

Neck thickness 22.9mm near 12th fret

Scale 648mm (25.5")

RADIUS184mm (7.25")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Modified partReplacement of jack with PURE TONE JACK

Repair/Maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, switch replacement