USED GUILD / Starfire Bass II Black MOD [4.22 kg / Manufactured in 2018]

The Starfire Bass II is the two-pickup version of the Guild Starfire Bass, a hollow-body bass.

This is the Guild Starfire II Bass. It features a semi-hollow mahogany body, a mahogany neck, an ebony fingerboard, and is equipped with a Guild BS-1 BiSonic BASS pickup. It also features a master volume control, individual volume and tone controls, a 3-way selector switch, and Grover tuners.

This semi-hollow bass features a warm tone and a 30 3/4-inch (781 mm) short scale.

The bridge has been replaced with a Schaller model; the holes from the original parts are visible. There are signs of use (minor scratches, scuffs, wear, wipe marks, picking marks, buckle marks, tarnish, pitting, and rust on metal parts, etc.).

It was set up upon arrival (fret leveling, cleaning, string replacement, truss rod adjustment, octave adjustment, and string height adjustment). The frets are at a height that poses no issues for playing, and the truss rod can be adjusted in both tightening and loosening directions; operation has been confirmed up to ±60° (currently set slightly tight).

Condition Grade: B+: Some minor scratches, but no issues for normal use

Serial Number: KSG1803655
Year of Manufacture: 2018
Case: Hard Case
Weight: 4.22 kg
Truss Rod: Note: Tested up to 60 degrees to the left and right with no issues (some play remaining)
Fret Wear: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.5 mm at the 12th fret
String Height (Treble Side): 2.2 mm at the 12th fret
Nut width: 38.1 mm (1 1/2″)
Scale: 781 mm (30 3/4″)
Strings at Setup: D'Addario / .050-.105 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, string action adjustment, neck straightening, fret leveling

* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.

* This is a one-of-a-kind item that is listed simultaneously on multiple online marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.