USED Fender / Custom Shop 1960 Stratocaster 3-Tone Sunburst [11]

Fender Custom Shop 60 Stratocaster made in 1997
1997 Fender Custom Shop 60 Stratocaster with slab rosewood fingerboard and lacquer finish, carefully reproducing the specifications of the 1960s.
The greatest feature of this model is the superb bird's eye maple used for the neck material. This is a special piece that has been carefully selected, with a three-dimensional grain pattern reminiscent of flamed and quilted wood, and is a finish that could only come from an instrument from the Custom Shop era, when they were particularly particular about the selection of wood.
The combination of the 3-tone sunburst alder body is exquisite, achieving a high-dimensional balance in terms of looks, sound, and playability. The vintage-style narrow frets and 9.5" radius fingerboard give it a classical playing feel.
This is a rare Custom Shop made instrument from the late 1990s. This is one of the rarest and most collectible pieces with a neck material as good as this.
There are scratches, dents, and paint peeling, and overall, the guitar has a lot of signs of use, but it gives the impression that it has been well used.
The parts are also tarnished, giving the appearance of age.
The pickguard has been replaced, and no original parts are included. The nut and pot have been replaced, but those original parts are included.
The inside of the cavity has been repaired with conductive paint to maintain playability and sound stability.
The neck is in good condition and there are no problems with playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: CN702329
Year of manufacture: 1997
Country of manufacture: USA
Case: Original soft case
Accessories: Arm Certificate
Weight: 3.65kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 20.9mm
Neck thickness near 12th fret: 24.9mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment.

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary depending on the climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
CN702329

Year of manufacture
1997

Country of manufacture
U.S.A.

Case
Genuine soft case

Accessories
Arm Certificate

Weight
3.65kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.0mm

Neck thickness near 1st fret
20.9mm

Neck thickness near 12th fret
24.9mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and alignment