USED Epiphone / LPS-85F Les Paul Standard Honeyburst [11]

Epiphone Japan-made LPS-85F Les Paul Standard is in stock!
This Les Paul Standard model was manufactured at the Fujigen factory in Japan between 1998 and 2002.
The basic specifications are faithfully reproduced and followed the Gibson Les Paul Standard.
Maple top/mahogany back, mahogany neck, and rosewood fingerboard.
The top is photo-framed to mimic a figured maple top.
The head is a popular Gibson small head and the neck is a deep joint!

There is no model number or sticker, but it is believed to be a genuine pickup.
This is a high quality guitar with a great sound that is as good as the original Gibson.
There are scratches, dings, paint chips, and age-related deterioration.
The head has minor scratches, a small chip at the tip, and minor dings.
There are dents and paint chips on the side/end of the body.
Metal parts are scratched, rusted, and dull.
There is no noticeable abnormality on the neck, so there is no problem in playing condition.

* 6 string pegs have been replaced due to deformation and both front and rear escutcheons have been replaced due to cracks.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial number: 901019
Year of manufacture: 1999
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 3.89kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 24.8mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
901019

Year of manufacture
1999

Country of manufacture
Japan

Case
Non-genuine soft case

Weight
3.89kg

Truss Rod
No problem, rod checked up to 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.0mm

Neck thickness near 1st fret
21.0mm

Neck thickness near 12th fret
24.8mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing