USED Fender Japan / ST62G 3-Tone Sunburst [11]

Fender Japan A Stratocaster that recreates the 1962 style!
Based on the "Made in Japan" label and the "N" serial number, this guitar is believed to have been manufactured by Fujigen between 1993 and 1994; however,
However, no model matching this guitar’s specifications—“’62-style,” “gold hardware,” and “3-Tone Sunburst”—can be found in the catalogs from that period. Since its specifications closely resemble those of the “ST62G-80TX,” which appeared in catalogs around 1996, it is believed to be an early version of the “ST62G-80TX.”
The pickups have been replaced, and since it does not feature the Texas Special pickups characteristic of the “ST62G-80TX,” I cannot confirm the exact model number.

The current pickup configuration consists of vinyl-wound pickups (with no front/rear designation) and a Seymour Duncan “SSL-2” (RWRP—Reverse-Wound, Reverse-Polarity) in the middle position.
This is a truly captivating guitar with a luxurious look featuring a 3-ply black pickguard and gold hardware!
Overall, it shows signs of wear and tear appropriate for its age, such as scratches and dents.
Signs of aging, such as rust and tarnish, are visible on the metal parts.
There are dents and paint cracks on the body. The back panel is missing.
The neck shows no noticeable issues and is in good playing condition.

Condition Grade: B+: Some scratches, but no issues for normal use

Serial Number: N049503
Year of Manufacture: 1993–1994
Country of Manufacture: Japan
Case: Genuine soft case
Accessories: Arm
Weight: 3.35 kg
Truss Rod: No issues; rod movement tested up to 60 degrees to the left and right with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.0 mm
Neck thickness near the 1st fret: 22.7 mm
Neck thickness near the 12th fret: 25.2 mm
Scale length: 648 mm (25.5")
RADIUS: 184 mm (7.25")
Strings at setup: D'Addario EXL120 / .009-.042 set
Modifications: Pickup replacement
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, repair of the neck joint screw hole on the bass string side

* As this is a used item, there may be scratches, dents, or other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any specifications listed regarding the truss rod, remaining fret life, or string height were measured by our staff during setup; these values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives.

* This item is a one-of-a-kind piece that is listed simultaneously on multiple online marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize in the unlikely event that the item is sold out after you place your order, and we ask for your understanding.