USED Orville / Les Paul Standard LPS-75 1998 Ebony [12]

Orville" Les Paul Standard, a Gibson-approved Japanese brand that was distributed in Japan from the late 1980s to the late 1990s, is now in stock.
This is a 1998 Les Paul Standard made by Fujigen, and is believed to be the last model made by Fujigen.

The wood specs are maple top/mahogany back body, set neck jointed mahogany neck and rosewood fingerboard, just like the original Gibson.
The pickups are Orville originals made in Japan, which together with the exquisite construction, give the guitar an exquisite sound.
There is a paint chip associated with a ding on the tip of the head on the 6th string side, and numerous scrapes and paint chips on the end of the body back.
There are also some minor scratches and dings scattered throughout, and the hardware is dull.
Although the instrument shows some signs of use, it has been maintained and cleaned at our repair center, including replacement of the front and rear escutcheons and jacks, and is in good playability condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: 803476
Year of manufacture: 1998
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 3.62kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 21.1mm
Neck thickness near 12th fret: 25.1mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
803476

Year of manufacture
1998

Country of manufacture
Japan

Case
Non-genuine soft case

Weight
3.62kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.0mm

Neck thickness near 1st fret
21.1mm

Neck thickness near 12th fret
25.1mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and alignment