USED Fujigen / J-Classic JST6R Lake Placid Blue [12]

Japanese ST model with circle fretting system.
This ST type is made by Fujigen, which has been manufacturing instruments for numerous Japanese makers since the dawn of domestic guitars.

The small head, loinwood fingerboard, and 3-ply pickguard are based on the ST of the early 60s, but with a gentle fingerboard radius and jumbo frets, it is also suitable for modern playing styles and tones.

A circle fretting system is installed for a clear, rising sound and rich sustain.
There are scattered dents on the head tip and body sides/back.
There is a small paint chip on the back contour and part of the back panel is cracked.
The arm is missing and there are some signs of use, but all parts have been maintained and cleaned at our repair center, and the playability is good.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: J191010
Year of manufacture: 2019
Country of Manufacture: Japan
Case: non-genuine soft case
Weight: 3.69kg
Truss Rod: No problem, rod is at 60 degrees to the left and right
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 20.9mm
Neck thickness near 12th fret: 23.8mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
J191010

Year of manufacture
2019

Country of Manufacture
Japan

Case.
Non-genuine soft case

Weight
3.69kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.0mm

Neck thickness near 1st fret
20.9mm

Neck thickness near 12th fret
23.8mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair