USED Epiphone / Les Paul Standard 1960 Tribute Plus Vintage Sunburst [12]

Equipped with Gibson 57 Classic pickups as standard!
Epiphone Les Paul Standard is popular among a wide range of users as well as beginners as Gibson's second brand.
This tribute model is based on the specifications of the 1960s.

Traditional specs such as flame maple top/mahogany back body, maple neck/rosewood fingerboard are combined with modern features.

It is equipped with locking pegs for speedy string changes and stable tuning, and the neck shape is 1960-style slim taper.

Gibson 57Classic / 57Classic+ pickups are standard, and each tone can be pulled up for coil tapping.

This model can handle a wide range of sounds, from the fat and powerful Les Paul sound to the subtle and bright sound.
There are some minor scratches and dents scattered throughout, and the hardware is dull.
The overall appearance of the instrument is slightly worn, but it has been maintained and cleaned at our repair center, and is in good playability condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: F323668
Country of manufacture: China
Case: Hard Case
Weight: 4.14kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard is high enough.
String Height: Bass string side: 2.0mm above the 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.7mm
Neck thickness near 1st fret: 20.6mm
Neck thickness near 12th fret: 22.8mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number F323668

Country of manufacture China

CaseHard case

Weight 4.14kg

No truss rod problem.

Fret remainder no problem, there is enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.7mm

Neck thickness near 1st fret 20.6mm

Neck thickness 22.8mm near 12th fret

Scale 628mm (24.75")

RADIUS305mm (12")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment